1

Classification of wires and cables for electrical equipment

Description of the classification of the specifications and models of wires and cables for common electrical equipment. Wire and cable for electrical equipment: wire products used to realize the conversion of power transmission (magnetic) energy, information and electromagnetic energy.

Release time

2021-09-18

Common national standard wire and cable models and specifications

Because there are many types of wires and cables for electrical equipment, there are different classification methods for wires and cables for electrical equipment according to their characteristics. Comprehensive product performance, structure and manufacturing technology similarity, combined with the power system wire and cable use characteristics, electrical equipment wire and cable can be divided into bare wire, magnetic cable, power cable, electrical equipment wire and cable, communication wire and cable three categories.

Release time

2021-09-03

Introduction of Low Voltage Power Cable

A power cable is a conductor covered with an insulating layer, a protective layer, a shielding layer, or the like. Used to transmit power or signal current and signal voltage. According to the voltage can be divided into high voltage cable and low voltage power cable. Compared with low-voltage overhead lines and low-voltage overhead insulated lines, low-voltage cable lines are more expensive and more difficult to lay and maintain. However, due to their reliable operation, no rod, no land occupation, no obstruction of sight, and little influence from the outside world, they are widely used in low-voltage distribution systems. Low voltage power cable is composed of core, insulation layer and protective layer. The core is used to conduct current and is usually made of stranded copper or aluminum wire. Low voltage cable including single core

Release time

2021-08-19

Good news! Yanggu Haohui cable to add a utility model invention patent!

Good news! Yanggu Haohui cable to add a utility model invention patent!

On August 13, Shandong Yanggu Haohui Cable Co., Ltd. had another utility model patent "a compact circular conductor preparation device" authorized by the State Intellectual Property Office. After the patent project "a data transmission shearer cable" and "a data signal transmission scraper cable" declared by the company, it has made another major breakthrough in the core key technologies in the professional field.

Release time

2021-08-16

Zhang Daoyong, general manager of our company, was selected as the first "top ten migrant workers returning home to start their own businesses" in Liaocheng City"

Zhang Daoyong, general manager of our company, was selected as the first "top ten migrant workers returning home to start their own businesses" in Liaocheng City"

The first Liaocheng City "Top Ten Returning Migrant Workers" selection activity has been recommend by counties (cities, districts), preliminary evaluation by experts, field inspections, and re-evaluation roadshows. The selection work has recently ended. Zhang Daoyong, general manager of the company, was selected and ranked third in the overall score.

Release time

2021-08-05

Control Cable Installation

The rated voltage of the control cable should not be lower than the working voltage of the circuit, and should meet the requirements of transient and power frequency overvoltage that may be experienced. In order to reduce the spread of the control cable in the event of insulation breakdown, mechanical damage or fire, current, voltage, DC power supply, trip control circuit and other dual protection systems that require enhanced reliability, each independent control cable shall be used. After the control cable is put into operation, there is electrical interference between different cores of the same cable and between adjacent parallel cables. The main causes of electrical interference are as follows:

Release time

2021-08-04

Treatment method of water inflow of wire and cable

Wire and cable should not be damp, heat, corrosion or scratch. Wires and cables should be checked for a certain period of time, and any faults should be replaced in time. Wires and cables should not be overloaded. Frequently check the use of home appliances and lines, timely maintenance and repair. For the lines of old buildings, it is found that they are flooded or wet, especially the lines are in disrepair and aging. Please ask the electrician to repair them immediately. For lines that are easily soaked by floods, electricians should be required to move the lines and take overhead and moisture-proof measures. In rainy days, if the power is cut off immediately, ask the electrician to check the reason and assign special personnel to take care of it.

Release time

2021-07-20

[Do not forget your initiative mind Strives for Progress] Yanggu Haohui Cable Warmly Congratulates the 100 Anniversary of the Founding of the Party

[Do not forget your initiative mind Strives for Progress] Yanggu Haohui Cable Warmly Congratulates the 100 Anniversary of the Founding of the Party

[Do not forget your initiative mind Strives for Progress] Yanggu Haohui Cable Warmly Congratulates the 100 Anniversary of the Founding of the Party

Release time

2021-07-01

Use of control cables

The purpose of the control cable: mainly used to transmit control and measurement signals. The control cable is suitable for remote operation, stove control, signal and protection measurement circuits in industrial and mining enterprises and modern high-rise buildings. Mainstream and AC 50HZ, rated voltage is 450/750V, 600/1000V and below. As a connection line between various electrical instruments and automatic instruments, it plays a role in transmitting various electrical signals and ensuring the safe and reliable operation of the system.

Release time

2021-06-07

Fault Point Finding Method of Control Cable

In the past few decades, with the rapid development of the economy, the cable industry has been tremendous development, the formation of China's cable manufacturing industry productivity, shocked the world. With the expansion of the scale of China's electric power industry, rail transit industry, data communication industry, automobile industry and mining industry, the demand for wire and cable will also increase rapidly. The cable industry will have a lot of space in the future development. However, in the process of cable manufacturing and use, cable damage, cable conductor damage, core cut and other faults may occur. So, what are the methods to find the fault point of the control cable, take a look at it!

Release time

2021-05-24

< 1...345...10 >