Use of control cables

Release time:

2021-06-07 10:26

Control cablePurpose: Mainly used for transmission of control and measurement signals. The control cable is suitable for remote operation, stove control, signal and protection measurement circuits in industrial and mining enterprises and modern high-rise buildings. Mainstream and AC 50HZ, rated voltage is 450/750V, 600/1000V and below. As a connection line between various electrical instruments and automatic instruments, it plays a role in transmitting various electrical signals and ensuring the safe and reliable operation of the system.


Control cables can be divided into ordinary control cables, flame retardant (ZR) control cables, fire-resistant (NH), low-smoke low-halogen (DLD), low-smoke halogen-free (DW), high flame retardant (GZR), temperature-resistant and cold-resistant control cables, etc.
Control cable: PVC insulated and PVC sheathed control cable suitable for industrial and mining enterprises, energy and transportation departments, control and protection lines with AC rated voltage below 450/750V.
Under the eaves. Only when the cable is not directly exposed to sunlight or ultra-high temperature, can standard LAN cables be used and pipes are advocated. Ultraviolet (UV) -Do not use cables without UV protection in direct sunlight.
On the outer wall. To prevent direct sunlight on the wall and cause man-made damage. Heat-The temperature of cables in metal pipes or trunking is very high. At this temperature, the service life of many aggregated data will be reduced.
In pipes (plastic or metal). For example, in the pipeline, pay attention to the damage of the plastic pipe and the heat conduction of the metal pipe. Mechanical damage (retrofit costs)-Cable retrofitting is very expensive and requires at least two terminations per successive point.
Suspended operation/overhead cable. Consider cable sag and pressure. What binding method are you going to choose? Is the cable exposed to direct sunlight.
Directly laid in the underground cable trench, this environment is the least control scheme. The equipment in the cable trench should be checked in time for monotony or moisture. Earthing-If the shield of the control cable needs to be grounded, it needs to meet the corresponding specifications.
Underground pipes. In order to facilitate future upgrades, replace the cable, isolated from the external pressure and the surrounding environment, the auxiliary pipeline is isolated, and the auxiliary pipeline is a better way. But do not want the pipeline to remain monotonous for a long time, affecting the choice of cable type. Moisture in a twisted-pair cable in a LAN increases the capacitance of the cable, which in turn reduces the impedance, causing near-end crosstalk.
Want to know moreYanggu cable, wire and cable for electrical equipmentThe content, can pay attention to us.

Latest developments