What is the reason why the power cord of Yanggu power cable manufacturer is wet? The staff of Yanggu cable manufacturer and Yanggu cable manufacturer will introduce to you.

In the normal operation of the cable of the Yanggu power cable manufacturer, if a failure or other failure occurs for some reason, the water in the cable trough will enter the cable along the fault point; in civil buildings, especially in the use of large construction machinery Under circumstances, at construction sites, cable damage or breakdown accidents caused by various human factors are not uncommon. When such an accident occurs, the cable insulation layer of the Yanggu power cable manufacturer will be severely damaged, and water may enter the cable.

After laying the Yanggu power cable manufacturer's cable, due to site construction conditions, the cable head could not be made in time, causing the unsealed Haohui cable to break and expose it to the air for a long time, or even immerse it in water, causing a lot of water. Steam enters the cable.

When the cables from the Xinyanggu power cable manufacturer leave the factory, both ends of the Haohui cables are sealed with plastic sealing sleeves. However, after using it for a period of time according to the actual conditions of the construction site, the rest can only be wrapped in plastic sheet. If placed and sealed well, it will inevitably cause water vapor to penetrate into the cable over time.

In the process of making cable heads (including terminal heads and intermediate joints) of the Yanggu power cable manufacturer, due to the negligence of the construction personnel, the newly processed cable heads may accidentally fall into the stagnant water on site.
After laying the Yanggu power cable manufacturer's cable, due to the construction conditions on site, the cable head could not be made in time, so that the unsealed cable was broken and exposed to the air for a long time, or even immersed in water, resulting in a large amount of water. Steam enters the cable.
When the cable from Xinyanggu power cable manufacturer leaves the factory, both ends of the cable are sealed with plastic sealing sleeves. However, after using it for a period of time according to the actual conditions of the construction site, the rest can only be wrapped in plastic sheet. If the mineral insulated fireproof cable manufacturer is placed and sealed well, it will inevitably cause water vapor to penetrate into the cable over time.